The KwêBeams system has been designed to be effective & easy to install. One sensor with a KwêHub completes a fully operational alarm system. Additional sensors and devices can be added as required.
A fully programmable built-in siren in each sensor provides an unexpected element of surprise next to an intruder. No additional siren installation is required.
The KwêBeams 4 Beam Outdoor Security Kit has been designed to be effective & easy to install. The kit includes the following:
The KwêBeams Outdoor Security Starter Kit has been designed to be effective & easy to install. The kit includes the following:
The Kwêbeams Budget Security Starter Kit is a SPECIAL offering from Krypton Security and has been designed to be effective & easy to install. The kit includes the following:
This kit is very affordable to start with and easily expandable as your requirements increase. Simply add more Sensors or Beams as you need them!
The KwêBeams system has been designed to be effective & easy to install. One outdoor sensor with a KwêHub completes a fully operational outdoor alarm system. Additional sensors and devices can be added as required.
The Anti-Masking version includes Active Infrared sensors that detects damaged lenses or unwanted objects in front of the lens. This prevents masking attempts while the system is armed or disarmed.
The KwêBeams outdoor motion sensor features dual PIR detection to ignore pets & detect people. Both top & bottom detectors must sense a moving heat source for a valid alarm signal. False alarms are further reduced with software algorithms to differentiate true detection from environmental noise.
The system is completely wireless and powered by standard AA alkaline cells. All wireless beams can transmit & receive signals for reliable 2-way communication. Built-in repeater functionality strengthens wireless performance and overcomes wireless range issues.
The KwêBeams wireless indoor sensor features a built-in siren that provides an unexpected element of surprise next to an intruder. This ensures that you are always in control and that the spotlight remains firmly on the intruder.
The KwêBeams mobile app offers an extensive range of customization features for the built-in siren. Whether you need to mute the alarm for a quieter environment or adjust the duration of the siren, every aspect is controllable through the app.
The Keypad is used to control the KwêBeams system. This includes arming and disarming all beams, bypass individual Zones & making programming changes to any KwêBeams device. The panic button can be used to sound all Beam sirens at the same time.
The Keypad monitors 8 individual zones with the option to assign more than one sensor to the same Zone number. A total of 32 devices can be monitored when 4 sensors share a Zone number. It receives Alarm, Tamper and Low battery signals to give a visual & audible overview of the complete system.
The KwêHub supports WiFi and 4G/LTE connectivity to give authorized users full access to the KwêBeams system from our mobile App. The KwêBeams system can also be controlled directly from the KwêHub if there is no internet connection available. It immediately sends an alarm signal to all users registered on the system. The KwêHub supports push notifications and optional SMS messages to send alarm & system information to users.
The KwêHub controls and monitors all connected KwêBeams devices using a robust 2-way radio protocol over the 868Mhz frequency spectrum. The 2-way radio technology features built-in repeater functionality in all devices and allows you to monitor the operation between detectors at distances up to 1000m, provided there are no obstacles.
The KwêBeams Wireless Link Sensor is equipped with a shock and tilt sensor. The sensor is activated when the angle of inclination changes, or when struck. The sensitivity level of the shock detector is adjustable.
Typical applications are to monitor theft and vandalism on gate motors, solar panels, borehole pumps and other fixed assets. Opening and closing of garage doors can be monitored with the tilt detector when the sensor is mounted on the inside of the garage door.
The KwêBeams Interface unit features a multipurpose optical input for Alarm, Tamper or Panic monitoring. This input is useful to monitor electric fence energizers, gate motors & alarm systems. The input can also be programmed to have a Panic function. This will sound all beam sirens simultaneously when the input is triggered.
The unit also features a second digital input to Arm & Disarm the KwêBeams system. A remote receiver or existing alarm system can be connected to this input to Arm & Disarm the KwêBeams system.
The module receives information about alarms and events via a wired connection. Having received an event, it transmits it to the KwêHub via the 2-way 868Mhz radio protocol, and the Kwêhub notifies the system users.
The Transmitter works with any detector or device with NC/NO contact type. The module supports shock and tilt detection with alarm and trouble inputs. The type of event determines the alarm notification received by the user.
The 2-way radio technology features built-in repeater functionality to illuminate any range issues with third-party detectors.
The KwêBeams Mobile App provides you with these handy features:
