KwêBeams Interface Unit
R860.00
The KwêBeams Interface Unit features a multipurpose optical input for Alarm, Tamper or Panic monitoring. This input is useful to monitor electric fence energizers, gate motors & alarm systems.
ABOUT THE KwêBeams Interface Unit
The KwêBeams Interface Unit features a multipurpose optical input for Alarm, Tamper or Panic monitoring. This input is useful to monitor electric fence energizers, gate motors & alarm systems. The input can also be programmed to have a Panic function. This will sound all beam sirens simultaneously when the input is triggered.
The KwêBeams Interface Unit also features a second digital input to Arm & Disarm the KwêBeams system. A remote receiver or existing alarm system can be connected to this input to Arm & Disarm the KwêBeams system.
The relay output with programmable delay can activate any connected device (spotlights, sirens, armed response etc.) when a valid alarm signal is received.
The 8 open drain outputs can be used to report Alarm events for 8 individual zones. When the wireless sensor sends an alarm signal, the Interface unit processes the signal and activates the wire output corresponding to the zone number of the sensor.
Example applications where the Interface Unit can be used:
- Connect remote receivers to Arm / Disarm the Kwêbeam system
- Link to any existing alarm panel
- Link to armed response radio
- Monitor any device for Alarm and Tamper signals
- Connect sirens, lights etc.
- Visual & audible alarm indication
- Monitors Alarm, Low battery & Troubled Zones
- Backlight for visibility in low-light conditions
- Arm / Disarm all Kwêbeam sensors
- Temporarily bypass zones
- 868Mhz Two-Way wireless communication
- Multiple keypads supported on the same system
- Panic sounds all beam sirens at the same time
- Operates from standard AA alkaline batteries
- 1 Year battery life
Related products
KwêBeams
